Power Consumption

Battery status

This section is outdated. LTC2942 is not used since ProgArm 0.3.

Charge prescaler

LTC2942 provides a prescaler, which is set to 32 in default ProgArm firmware. You can adjust this value depending on the precision you need and your maximum battery capacity.

PrescalerMax battery
capacity
143.52
287.04
4174.08
8348.16
16696.32
321392.64
642785.28
1285570.56

Please note that if you plan to change prescaler value, you must change it both in the client and in the firmware.